-40%
USED Guardian G38 Series Mixing Valve Tempering System
USED Guardian G38 Series Mixing Valve Tempering System
USED Guardian G38 Series Mixing Valve Tempering System
USED Guardian G38 Series Mixing Valve Tempering System
USED Guardian G38 Series Mixing Valve Tempering System
USED Guardian G38 Series Mixing Valve Tempering System
USED Guardian G38 Series Mixing Valve Tempering System

USED Guardian G38 Series Mixing Valve Tempering System

$ 211.2

Availability: 100 in stock
  • Suitable Media: Water
  • Brand: Guardian
  • All returns accepted: ReturnsNotAccepted
  • MPN: Does Not Apply
  • Body Material: Brass
  • Custom Bundle: No
  • Condition: Used

    Description

    Guardian G38 Series Mixing Valve Tempering System. Condition is Used. Shipped with USPS Parcel Select Ground.
    The bottom was information was taken from the manufacturers website. The product itself  looks new. None of the handles or adjusting valves are damaged. Hot sticker label is missing. Appears to be never mounted. Clean metal and internals.
    Please any questions before purchasing.
    G3800LF
    Tempering Valve, 44 Gallon Capacity
    Application: Tempering valve to blend hot and cold water to deliver tepid water. Valve has flow capacity of 3.0 to 44 gallons per minute (GPM). Valve can be used with single installation of an emergency shower or safety station, or multiple installations of eyewash, eye/face wash, dual purpose eyewash/drench hose, or drench hose units.
    Temperature Control: Valve has bimetallic thermostat that senses incoming water temperature and automatically blends water to 85°F (29°C). High temperature limit stop is set to 90°F (32°C). Valve has dial thermometer on outlet to monitor temperature of delivered water. Note: Valve may need to be adjusted when installed based on incoming water temperature. Refer to “Installation Instructions” on the following page for further information.
    Fail Safe: In event of restriction or failure of hot water supply, internal bypass allows valve to deliver cold water to emergency unit. In bypass mode, valve will deliver 20 GPM of cold water at 30 PSI flow pressure. In event of loss of cold water supply, valve will close to prevent scalding and not deliver water.
    Supply Temperature: Minimum recommended hot water supply temperature is 120°F (49°C). Note: Extremely cold climates may require a hot water supply temperature greater than 120°F (49°C).
    Supply Pressure: 30 PSI minimum supply pressure is required for proper valve operation. Maximum supply pressure is 125 PSI. Maximum hot to cold water pressure differential is 5%.
    Mounting: Furnished with heavy duty mounting bracket for securing valve to panel or wall.
    Inlets: 1" NPT female hot and cold water inlets. Inlets can be rotated 360 degrees for top or bottom supply. Each inlet has integral water strainer, check valve and supply stop.
    Outlet: 1-1/4" NPT female outlet.
    Quality Assurance: Valve is completely assembled and water tested prior to shipment. Valve is certified to ASSE 1071. Valve is certified to meet low lead requirements of wetted surface area less than 0.25% lead by weight.